BOB B-530x18 | BOBRICK Extra Heavy Duty Surface Mounted Straight Towel Bar
Bobrick Extra Heavy Duty Surface Mounted Straight Towel Bar- Concealed Mounting: shall be type-304 stainless steel with satin finish.
- Towel bar shall have 18-gauge (1.2mm) wall thickness and 1" (25mm) outside diameter.
- Clearance between the towel bar and wall shall be 1-1/2" (38mm).
- Concealed mounting flanges shall be 1/8'' (3mm) thick stainless steel plate, 2'' x 3-1/8'' (50 x 80mm), and equipped with two screw holes for attachment to wall.
- Flange covers shall be 22-gauge (0.8mm) stainless steel, 3-1/4'' (85mm) diameter, and shall snap over mounting flanges to conceal mounting screws.
- Ends of towel bar shall pass through flanges and be welded to form one structural unit.
- Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
- 18" length bar.
- For use in hospital and hotel bathrooms.
- Withstands 900 lbs (408 kg) downward pull when properly installed.

Materials:
- Towel Bar: 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin finish. 1" (25mm) outside diameter.
Ends are welded to flanges.
Clearance between the towel bar and wall is 1-1/2" (38mm).
Concealed Mounting Flanges — 18-8 S, type-304, 1/8'' (3mm) thick, stainless steel plate. 2'' x 3-1/8'' (50 x 80mm) with two holes for attachment to wall.

- Snap Flange Covers : 18-8 S, type-304, 22-gauge (0.8mm) drawn stainless steel with bright polish finish. 3-1/4'' (85mm) diameter x 5/8'' (16mm) deep.
Each cover snaps over mounting flange to conceal mounting screws.

Strength:
Towel bar will support loads in excess of 900 pounds (408-kg) if properly installed.
Caution: Towel bars are no stronger than the anchors or walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended.