ASI 0485 | ASI Recessed Seat Cover and Toilet Paper Dispenser
American Specialty Recessed Seat Cover and Toilet Paper Dispenser: shall hold and dispense 1000 paper seat covers and two rolls standard or 1800 sheet
4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper.
- Seat cover dispenser panel and toilet paper dispenser door shall be fabricated of 18 gauge type 304 stainless steel alloy 18-8. Face frame and cabinet shall be 22 gauge.
- All exposed surfaces shall have No 4 satin finish and be protected by PVC film easily removed after installation.
- Seat cover cutout shall have a fully deburred edge for snag-free dispensing and user safety.
- Toilet paper dispenser/disposal door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø5) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Face trim shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square return to face of wall.
- Structural assembly of all components shall be of welded construction.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in stainless steel endpins and two (2) rollers [p/n R- 004] shall be supplied.
- Wall Opening: 16" x 29 1/4" x 4 1/4"

Installation:
Mount unit in wall recess using four (4) No 10 self-tapping screws (by others) through concealed mounting holes provided.
Note that top of RWO (rough wall opening) is 13/16" (21) below top of unit. For ADAAG compliance the centerline of the TP Dispenser should be located within 7" to 9" (178-227) of the front of the toilet and the TP Dispenser opening bottom should be above 15" (381) minimum AFF while the Seat Cover Dispenser opening centerline should be no higher than 48" (1219) maximum AFF.
An optional GB (not provided) at 33"-36" (838-914) AFF to the top of the bar should allow the service door top to clear the bottom of the bar when opening the door.


Operation:
- Seat covers are self-feeding until supply is depleted. Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning.
- Toilet paper rolls and paper seat covers are serviced by unlocking and opening door.
- Locked door prevents inadvertent dumping and unauthorized removal. Toilet paper spindles are carried in vandal resistant subframe accessible when door is opened.