ASI 0398 | ASI Heavy Duty Stainless Steel Recessed Soap Dish with Rectangular Solid Bar For Dry Wall Mounting
American Specialty Heavy Duty Stainless Steel Soap Dish with Rectangular Solid Bar For Dry Wall Mounting: shall be formed of 20 gauge alloy 18-8 seamless deep drawn stainless steel, type 304. Exterior shall have polished bright finish.
- Retaining lip with rounded corners shall be welded to body and shall project 5/8" (16) from bezel.
- Optional mounting clamp shall be fabricated of 18 gauge corrosion protected steel with mounting holes for No 8-32-UNC-2A machine screws (by others).
- Bar shall be stainless steel with cross section of 3/16" thick x 1" high (5 x 25) with 3/4" (19) radius bends and shall be welded to bezel.
- Water runoff path shall be provided as pattern of raised dimples on soap shelf and shall prevent soap from slipping.
- Overall Size: 7 1/8" x 5" (180 x 130 mm).

Installation
For Standard Recessed Mounting:
Use two (2) No 8 stainless steel Philips flat or oval head self tapping or wood screws (by others) of suitable length to penetrate blocking in back of RWO by approximately 1/2" (13). Apply a continuous bead of silicone sealant (by others) behind flange.
Tighten screws to hold flange tight against finished wall face. Wipe off excess sealant immediately.

Optional Method for Recessed Mounting:
Order separate item Model No 40 dry wall clamp. Loosely attach clamp to the back of the unit with two (2) stainless steel Philips
flat or oval head No 8-32-UNC-2A machine screws (provided by others to suit wall conditions). Apply a continuous bead of
silicone sealant (by others) behind flange. Insert into RWO and adjust clamp so that it grips inside wall surface through
opening. Secure accessory to clamp and wall by tightening screws. Wipe off excess sealant immediately.

Rough Wall Opening (RWO) required is………. 6-1/8" W x 4-1/8" H x 4" D (156 x 105 x 102)

Operation:
Raised dimples on the soap shelf allow water to drain away and provide gripping surface to retain soap.