SSS 3M23555 | SSS Low Odor Stripper, 22H
SSS 22H Low Odor Stripper : is a low-odor floor stripper for use on most resilient tile floors. This stripper is formulated to quickly and
effectively remove multiple layers of floor finish and sealer.

Applications:
- Most resilient tile floors.
- Not for use on wood floors.

General Use Directions :
1. Dispense 3M Floor Stripper LO using the Twist ‘n Fill dispenser into a mop bucket.
2. Liberally apply the diluted stripper solution with a mop, (100 sq. ft./gallon) leaving the floor uniformly wet.
3. Allow 5-10 minutes for the stripper to penetrate and soften the finish. Do not let floor dry until rinsing withwater.
4. Use a low speed floor machine (175 rpm) with the appropriate 3M stripping pad to thoroughly remove the old finish from the floor.
5. Pick up the soiled solution with a wet vacuum.
6. Flood rinse the floor with clean water and remove with wet vacuum.
7. Mop the floor with a tightly wrung mop of clean water.
8. Let the floor dry completely before applying new finish.
Note: When using an automatic scrubber equipped with appropriate 3M pad, remember to allow the stripping solution to remain wet on the floor for five minutes before agitation and pickup.