RUBBERMAID Horizontal Wall-Mounted Baby Changing Station - 35" W x 22" H
BOB KB200-00 | RUBBERMAID Horizontal Wall-Mounted Baby Changing Station
Bobrick Horizontal Wall-Mounted Baby Changing Station:
- Shall be durable, injection-molded polypropylene.
- Design of unit shall be surface-mounted.
- Unit shall be equipped with a pneumatic cylinder for controlled opening and closing of bed.
- Bed shall be secured to metal mounting chassis with a concealed steel-on-steel hinge.
- No hinge structure shall be exposed on interior or exterior surfaces.
- Unit shall have mounting hardware included.
- Unit shall have Microban® antimicrobial embedded into plastic material on the changing surface.
- Unit shall comply with ADA regulations when properly installed.
- Bed shall have smooth concave changing area with a nylon safety strap and two hooks for bags or purses.
- The design and manufacture of Koala products Is intended to be compliant with the 2010 ADA Standards for Accessible Design and the 2009 ICC A117.1, Accessible and Usable Buildings and Facilities.
- Unit shall conform to ASTM F 2285-04 Standard Safety Performance Specification for Diaper Changing Tables for Commercial Use, ANSI Z535.4 Product Safety Signs and Labels, EN 12221:2008, ASTM G22 Antibacterial standards or local code if more stringent Installation requirements are applicable for Barrier-Free accessibility
- Unit shall have a built-in Liner Dispenser for use with 3-ply chemical free biodegradable bed liners, instructional graphics and safety messages in 4 languages.
- Optional Braille label is available.
- Unit shall be backed by manufacturer’s 5-year limited warranty on Materials and workmanship and include a provision for replacement caused by vandalism.
- Unit shall be manufactured in the U.S.A.
- Unit 35" W x 22" H (890 x 560mm).
- Depth (closed) 4" (100mm).
- Extension (open) 22 1?2" (570mm).
Concealed pneumatic cylinder and metal mounting chassis provides controlled, slow opening and closing of bed. Polypropylene is easy to clean and resists odors and bacterial growth.
Complies with ASTM static load performance requirements when properly installed.
Warning: To ensure that the unit supports the intended loads, baby changing stations must be properly installed according to the manufacturer’s instructions.
- Item Number: BOB KB200-00
- Horizontal Baby Changing Station, 35 3/16 X 22 1/4, Cream
- 35" W x 22" H
Shipping Weight per Each : 30.00 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
$493.20SmartJan:$283.59You Save:$209.61 Per Each