ASI 117 | ASI Surface Mounted Toilet Tissue Holder For Front Mounting
American Specialty Surface Mounted Toilet Tissue Holder For Front Mounting: shall be 14 gauge type 304 stainless steel 18-8 alloy.
- Exterior surface shall be satin finish. Interior surfaces shall be glass blasted matte finish.
- All edges shall be welded, ground smooth and have rounded corners.
- Unit is provided with four (4) mounting holes that accommodate 1/4"-20 X 2" long Torx® round head machine screws (supplied) to be inserted into wall anchors (by others).
- Unit shall hold 320 sheets when fully loaded.
- Overall Size: 4 3/4" x 9" x 2 3/4"

Installation:
For compliance with ADA accessibility Guidelines, install unit so that bottom of holder is between 19" [483] minimum above finished floor (AFF) to 44" [1118] maximum AFF and centerline of dispenser is 7" -9" [178-229] from front of toilet.
Recommended mounting height is 32" [813] minimum from top of holder AFF.
Surface mount unit to finished wall and secure to wall anchors (by others) with four (4) 1/4"-20 X 2" long Torx® round head machine screws through mounting holes provided.

Operation:
Tissues are manually dispensed through the front slot of the unit until supply is depleted. Tissues are replenished on a cycle determined by maintenance needs.