ASI 0472 | ASI Partition Mounted Dual Access Sanitary Napkin Disposal
ternally by full width ?-retainer and shall have fully hemmed-finger grip for safety and service removal from one side only

Installation:
Partition mount unit through precut partition cutout (PCO) using four (4) ¹ 10 x 3/4" (M5 x 20) Philips flat head or oval head self tapping screws (supplied) per side (eight [8] total) through mounting holes provided through fixed mounting frame and adjustable mounting frame into suitably prepared partition (by others).
Mounting holes are offset 1/2" (13) from opposite side frame holes for screw clearance. Note that cutout is 3/16" (?4.8) above cabinet door top and 13/16" (21) below mounting flange top edge.
Mounting flanges adjust to accommodate partition thickness of 1/2" (13) minimum to 3" (76) maximum.
For compliance with ADA Accessibility Guidelines and maximum usability install unit with top of disposal door 33" (864) MAX AFF and 24" (610) min AFF and 27" (686)
to centerline of cutout from rear wall.
PCO Required is 11-3/8" W x 15-5/8" H x 1/2" to 3" Thick

Operation:
Users push doors to deposit waste material. Doors are self-closing and operate independently and may be used simultaneously.
Maintenance schedule determines waste removal cycle. Empty unit by removing bottom waste container and inverting over collection bag.
Waste container is captured by internal angle to prevent inadvertent dumping.
Safety-edged finger grip provides convenient lift handle for service.