SSS 37030 | SSS 4-Ply Rayon Wet Sta-Flat Cut-End Mop
SSS 4-Ply Rayon Wet Mop:
- Constructed with bright white, 4-ply rayon yarn.
- Expertly apply finish or germicide.
- Minimal linting.
- Rayon is fast drying and mildew resistant.
- Ideal for use in food service or healthcare situations.
- Available in narrow, wide and Sta-Flat headband styles.
- Total PCC 42%
- PET% Content 19%
- Size: 32 oz
- Color: White
- Headband: Sta-Flat

Product Quality:
All Triple S mopping products are manufactured to high quality standards. They are specifi cally designed and manufactured for use in industrial and commercial maintenance applications – tough products for your tough applications.

Initial Cost vs. Value Received:
The dollars you spend on material and supplies are only about 10% of your overall cleaning budget. An extra dollar spent wisely on quality supplies will often save you that dollar many times over in LABOR expenses.

Looped-End Wet Mops vs. Cut-End Wet Mops:
Cut-end mops appear to be a better buy as the initial cost is lower, but because of the looped-end mop’s longevity and durability, it is a better overall value. In-use studies have shown that ONE SSS Super-Sorb Looped-End Mop will outlast EIGHT 4-ply cotton cut-end mops. Plus, the Super-Sorb Mop cleans twice the area in the same amount of time. If your staff is mopping 5,600 sq.ft./day you will save about $2,600 (labor savings) annually by changing from a cut-end to a looped-end mop!

Sta-Flat:
Sta-Flat fi xtures give the mop great maneuverability and performance. This simple design helps the mop lay fl at on the fl oor to improve coverage. Detachable, interchangeable screw-on handles are used with Sta-Flat fi xtures.

Yarn: Rayon
Advantage:
Absorbs and retains moisture quickly. Dries fast. Less lint. Resists mildew.

Disadvantage:
Shrinks when laundered. Less absorbent.

Application:
Applying fi nishes and disinfectants, etc.

Wet Mop Notes:
Drying:
Tumble at 120°F – 160°F until dry.
Longevity Tips:
1. Careful initial processing is essential for maximum mop head life.
2. All new mops should be processed separately, if possible, and overloaded 25 - 50% by weight.
3. The “break” operation should be reduced by 3/4, and maximum water temperature (160°F) used.
4. Rinses should be at a low level and the fi nal two rinses should be with cold water.