BOB B-527 | BOBRICK TrimLineSeries™ Waste Disposal Door For Mounting In Countertops
Bobrick TrimLineSeries™ Waste Disposal Door For Mounting In Countertops: shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish.
- Flange shall have 1/4" (6mm) 90° return.
- Self-closing door shall be equipped with a spring-loaded, fulllength stainless steel piano-hinge and an international graphic symbol.
- Rough Countertop Cutout: 11-1/4" W X 4-1/2" H X 3/4" to 1-1/2" mounting thickness 4-1/2" minimum clearance below mounting surface

Materials:
- Flange: 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. 1/4" (6mm) 90° return for maximum rigidity.
- Waste-Disposal Door: 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Self-closing door is equipped with a spring-loaded, full-length stainless steel piano-hinge. International graphic symbol identifi es unit.

Operation:
Self-closing door allows convenient disposal of paper towels and waste from the top by pushing downward through the hinged opening, then shuts tightly after use.
Designer’s Notes: Waste receptacle is not included with unit. Housing below countertop to conceal waste receptacle is not included with the unit—must be furnished by others. Waste-disposal door may be mounted in vertical surfaces of countertop also, including aprons, skirts, or front of cabinets.

Installation:
Unit is designed for Installation in countertop. 4-1/2" (114mm) minimum clearance below mounting surface is required. Mount unit through a cutout specially ordered from countertop manufacturer or fi eld cut. Dimensions of cutout are to be 11-1/4" wide x 4-1/2" high (285 x 115mm). Adjustable mounting tabs accommodate mounting thicknesses from 3/4" to 1-1/2" (19 to 38mm). For complete Installation instructions, see Form No. 527-69, packed with each shipment; also available in advance on request.