BOB 43644-134 | BOBRICK LinerMate® Waste Receptacles For ConturaSeries® B-43644
Bobrick LinerMate® for ConturaSeries® B-43644 12-gal. waste receptacle: shall have a molded plastic sleeve with a 20-gauge (.91mm) stainless steel, U-shaped support strap, hemmed for safety; riveted construction.
- LinerMate facilitates Installation and removal of disposable liners without unsightly liner overhang.
- LinerMate shall rest inside of waste receptacle.
- LinerMate fi ts most other manufacturers' similar 12-gal. waste receptacles with the following minimum dimensions: 22-3/8" H x 14-13/16" W x 6-7/8" D

Operation:
To insert disposable can liner, lift LinerMate up and forward from waste receptacle and rest over front edge with the bottom notches of LinerMate sleeve engaged on top front edge of receptacle. Place disposable liner inside LinerMate and fold trash liner over LinerMate sleeve. Tie a knot in the corner of the can liner, then place LinerMate with disposable liner back into receptacle. To empty, gather disposable liner from LinerMate sleeve and lift bag up.

Materials: LinerMate Accessory — Molded plastic sleeve and U-shaped, 18-8 S, type-304, 20-gauge (.91mm) stainless steel support strap hemmed for safety; riveted construction. Rests inside of waste receptacle area, removable for servicing. Fits Bobrick and
most other manufacturers' comparable 12-gal. capacity receptacles.
Applications: : Bobrick ClassicSeries™
Model Numbers B-3644, B-3942, B-3944, B-3949, B-3961, B-39619, B-3974, B-3979

Applications: Gamco TW and WR Series
Model NumbersTW-1, TW-1-6, TW-1C, TW-1F, TW-1FS,TW-1M, TW-1MC, TW-14RP, TW-14RPT, WR-6, WR-14

Other Manufacturers LinerMate fits most other manufacturers' similar 12-gal waste receptacles with the following minimum dimensions:
Model Numbers22-3/8" H x 14-13/16" W x 6-7/8" D (570 x 375 x 175mm)

Applications: Bobrick ConturaSeries®(For retrofi t into units manufactured prior to Jan. 2010)
Model NumbersB-277 3944-134 B-43644 , B-4369, B-43699 B-43944, B-43949