BOB 3944-130 | BOBRICK TowelMate® Waste Receptacles
Bobrick TowelMate® For 4" Deep Paper Towel Dispensers: shall be type-304 stainless steel with 2B fi nish. Black nylon support rod, 3/8" (10mm) diameter,
fastened to module with stainless steel sheet metal screws.
- TowelMate Accessory fi ts into Bobrick Model number(s) B-3942, B-3944, B-3947, and B-3949 ClassicSeries Paper Towel Dispensers and other manufacturers' similar models; and B-4362, B-43944, B-43949 ConturaSeries standard in units after May 2010.
- Paper Towel Dispenser fitted with TowelMate Accessory shall dispense 800 multifold paper towels.
- TowelMate Accessory Module has a 90 degree return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing, and aTowelMate Nylon Support Rod fi tted across the center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening).
- TowelMate reduces paper towel waste by 20% – 40% and complies with US EPA Reduce & Reuse Resource Conservation Initiative.

Operation:
Optional TowelMate Accessory fi ts into Bobrick Model number(s) B-3942, B-3944, B-3947, or B-3949 ClassicSeries Paper Towel Dispensers; and B-4362, B-43944, B-43949 ConturaSeries standard in units after May 2010.
- TowelMate Accessory Module has towel guide angle with 90 degree return to prevent paper towels from falling forward out when door is opened for servicing.
- TowelMate Accessory Support Rod allows dispenser to dispense paper towels one at a time without tabbing, tearing, bulging, sagging and bunching. To load paper towels in towel tray, place stacks of folded paper towels inside module with bottom paper towel leaf facing forward. Feed fi rst sheet from bottom of the towel tray opening over the rod and through the opening to conceal rod and start dispense.