ASI 0829 | ASI Surface Mounted Corner Waste Receptacle
American Specialty Surface Mounted Corner Waste Receptacle: shall hold 2.13 cu. ft. (.06m?) or 16 gal (60 liters) of dry/solids waste and shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge.
- All exposed surfaces shall have a No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
- Structural assembly of container components shall be of welded construction.
- Unit shall have no exposed fastening devices or welded seams.
- Receptacle shall have eight (8) interior hooks for hanging a disposable bag (by others).
- Receptacle shall be mounted to wall through ‘key hole’ slots on back of unit and shall be theft resistant after installation of concealed locking screws.
- Overall Size: 15" x 23" x 14 1/2"

Installation:
- For general utility, mount the receptacle 16" (406mm) above finished floor (AFF) from bottom of unit.
- Hang unit on pre-installed two (2) screws (by others) on wall through the mounting ‘key hole’ slots on bottom of unit. Install and fasten four (4) theft-resistant
screws (by others) to wall through top of receptacle.
- For compliance with ADA Accessibility Guidelines, unit should be installed so that top edge is 40" (1016mm) maximum above finished floor (AFF).

Operation:
User deposits waste material. Maintenance schedule determines trash removal cycle. Unit is emptied by removing disposable bag (supplied by others) and emptying into appropriate bulk collection container.