ASI 0690-18 | ASI Surface Mounted Raised Edges Shelf
American Specialty Surface Mounted Raised Edges Shelf: shall be fabricated of alloy 18-8 stainless steel, type 304 and shall be 18 gauge. Shelf shall have a 5/8??
(16mm) lip on front with an extra return for rigidity and safety.
- Sides of shelf shall be closed and tapered from front to rear.
- Rear of shelf shall have a turned down leg with mounting holes. Shelf shall have a 3/8?? (10mm) depression in top surface inside perimeter rim.
- All edges shall be de-burred.
- All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
- 18" L X 6" D

Installation:
Unit is surface mounted on wall or partition using No 10 self tapping screws (by others) through (3) holes provided in shelf back return.
For compliance with ADA Accessibility Guidelines, unit should be installed so that shelf top is between 48" (1219mm) maximum above finished floor (AFF) and 32" (813mm) minimum AFF; for most common utility, typical is 42" (1067mm) AFF or 18" (457mm) above wash basin

Operation:
Shelf is stable and stationary after proper and secure mounting to adequate wall reinforcement or stud structure. Shelf is suitable for toiletry material storage.